Nordson FP-200 - Accessories, Kits, and Recommended Spare Kits; Description; Parts

Parts
8-20
Part 237478_03
E 2012 Nordson Corporation
Accessories, Kits, and Recommended Spare Kits
Tables 8‐3 through 8‐4 list commonly used accessories, kits, and spare parts
for the FP‐200 gun.
Table 8‐3 FP‐200 Gun Accessories and Kits
Part Description Notes
303 028 Conversion Kit,
Extrusion to Swirl,
FP‐200 Gun
This kit may be used to convert an FP‐200 extrusion gun (P/N 234 896) to
an FP‐200 swirl gun (P/N 234 897). Itcannot be used to convert an
air‐control‐kit FP‐200 extrusion gun (P/Ns 176 122 and 157 253) to a current
FP‐200 extrusion gun (P/N 234 896). Order the heat shield separately.
303 029 Conversion Kit, Swirl to
Extrusion, FP‐200 Gun
This kit may be used to convert an FP‐200 swirl gun (P/N 234 897) to an
FP‐200 extrusion gun (P/N 234 896). Itcannot be used to convert an
air‐control‐kit FP‐200 swirl gun (P/Ns 173 209 and 153 609) to a current
FP‐200 swirl gun (P/N 234 897). Order the heat shield separately.
234 970 Heat Shield, FP‐200
Extrusion Gun
Order with conversion kit
P/N 303029 (swirl to extrusion).
It is not necessary to order a heat
shield unless you are ordering a
conversion kit. Nordson FP‐200
guns (P/Ns234896 and 234 897)
come with a heat shield. The heat
shield is required for the gun to meet
CE approval standards.
234 965 Heat Shield, FP‐200
Swirl Gun
Order with conversion kit
P/N 303028 (extrusion to swirl).
Table 8‐4 Other Accessories
Part Description Note
901 915 Nozzle Cleaning Kit
900 298 Heat‐conductive Paste
132 426 Hose/gun diagnostic device with cable assembly