Nordson FP-200 - Page 111

Parts
8-21
Part 237478_03
E 2012 Nordson Corporation
Accessories, Kits, and Recommended Spare Kits (contd)
NOTE: Replacement modules are available as new or rebuilt parts. Contact
the Nordson Customer Service Center for information on rebuilt modules
available through the Rebuild/Exchange (RBX) program.
Table 8‐5 Module Replacement Kits
Part Description Note
117 714 Service Kit, Extrusion Module, H‐200 Reduced Cavity, 0.30mm(0.012 in.) orifice
117 804 Service Kit, Extrusion Module, H‐200 Reduced Cavity, 0.41mm(0.016 in.) orifice
117 715 Service Kit, Extrusion Module, H‐200 Reduced Cavity, 0.51mm(0.020 in.) orifice
276 119 Service Kit, Module, H‐200 Adjustable A
NOTE A: Order nozzle separately.
Table 8‐6 Module Rebuilding Kits
Part Description Note
272 818 Service Kit, Seal, H‐200 Module A
NOTE A: This kit can be used to rebuild the H‐200 adjustable module (P/N 276 119) or the CF‐200 swirl module
(P/N157266). Order nozzles separately.
Table 8‐7 Recommended Spare Parts
Part Description Note
169 725 Swivel, Ball, Multi‐plane,
5
/
16
in.
938 129 Heater Cartridge, 0.038 in. x 1.00 in., 240V, 80W (Two per gun.)
986 503 Retaining Ring, Internal, 37, Push‐on (Required when replacing air valve.)
234 884 Valve, Cartridge, 3‐way (Air Valve)
174 881 Cordset Assembly, FP‐200 with Eyelets (Includes RTD.)
972 862 Eyelet, 0.065/0.075 x 0.187 in. A
982 804 Hex Nut, Lock, 4‐40 A
271 620 Spring, Wave, Safety A
NOTE A: These items are easily misplaced when performing maintenance or repairs.