Maintenance
5-2
Part 237478_03
E 2012 Nordson Corporation
Introduction
Preventive maintenance procedures for Nordson FP‐200 guns include
periodic inspections and cleaning. Attempting any other repair procedure
can result in damage to the gun, improper system operation, or personal
injury.
Daily Maintenance
NOTE: Accumulated hot melt adhesive material can char and cause erratic
gun operation.
1. Wipe off hot melt adhesive from all exterior gun surfaces.
2. Clean any dust and debris from the work area.
Weekly Maintenance
Clean all nozzles weekly unless operational history indicates more or less
frequent cleaning is required. Nordson offers a nozzle cleaning kit. Refer to
Parts for the nozzle cleaning kit part number.
Semiannual Maintenance
Inspect the gun wiring semiannually.
To Next Page
Loading...
