Description
2-4
Part 237478_03
E 2012 Nordson Corporation
Introduction (contd)
A suspension package, which includes a mast and overhead balancer, bears
the weight of the gun and hose and allows a wide range of operator
movement. The gun assembly easily swings both left/right and in/out on the
swing arm, relative to the operator's position. This weight‐support design
and ergonomic configuration help reduce worker fatigue and physical stress
in bench‐top gluing applications such as automotive panels, appliance
panels, and furniture.
1
2
2
3
5
5
4
8
9
6
6
7
Figure 2‐3 System Components
1. Plastic squeeze clamps
2. Plastic tie strap
3. Tool balancer
4. Slide track
5. S‐hook
6. Nylon hose hangers
7. Pivot arm
8. Stationary hose mount
9. Vertical mast
To Next Page
Loading...
