Repair
7-19
Part 237478_03
E 2012 Nordson Corporation
d. Disconnect the outlet air line swivel fitting from the bulkhead fitting
(extrusion gun) or the T manifold (swirl gun).
1
2
3
4
5
7
6
8
9
Figure 7‐17 Mounting Plate and Trigger Handle Components
1. Red collar on inlet air line elbow
connector
2. High‐temperature air line tubing
3. Socket-head screws
4. Inlet air line elbow connector
5. Outlet air line swivel fitting
(extrusion gun)
6. Outlet air line swivel fitting
(swirl gun)
7. T manifold (swirl gun)
8. Gun mounting plate
9. Trigger handle
To Next Page
Loading...
