BA_v2_eagle_parallel_EN_1-0
11
safeTy insTRucTions
3 Safety instructions
Beforestartingupthedeviceforthersttime,pleasereadtheseinstructionsandinparticular
the safety instructions carefully at least once. This is to ensure that you have understood the
contents of this manual and how to operate the coin validator.
3.1 Proper use
Theelectronic5“coinvalidatorv
2
eagle with parallel BDTA or BACTA interface is intended for
use in slot and vending machines with parallel BDTA or BACTA interface and is designed to
checkthecoinsinsertedintothemachineforspecicpropertiesandtoaccept(andsort)or
reject them. Use the coin validator exclusively for this purpose. Under no circumstances can the
manufacturer be held liable for any damage or loss resulting from improper use of the device.
Thecoinvalidatorhasbeenbuiltinaccordancewithstate-of-the-artstandardsandtherecognized
safety rules. Nevertheless, this equipment can constitute a source of danger. Please observe
therefore the following safety instructions.
3.2 Protecting persons and equipment
The coin validator must only be connected by a trained electrician.
Use the coin validator only in accordance with its proper use. Under no
circumstances can the manufacturer be held liable for any damage or loss
resulting from improper use of the device.
ThecoinvalidatorPCBisttedwithcomponentswhichmaybedamaged
beyond repair by electrostatic discharges. Please observe the handling
instructions for components exposed to the risk of electrostatic discharge.
Select the correct voltage for the coin validator (see label).
Pay attention to correct electrical bonding in the machine.
Never pull the connecting cable of the coin validator from the machine when
a voltage is applied.
Pull the mains plug of the machine before installing, cleaning or removing
the coin validator.
Please consult Crane Payment Innovations if you intend to make additions
ormodicationstothedevicethatgoaboveandbeyondthemodications
described here.
Keep water and other liquids away from the coin validator.
Please dispose of the device correctly at the end of its service life.
Wereservetherighttomaketechnicalmodicationstothedevicewhich
are not covered by these instructions!