NRI v2 eagle - Sorting with NRI 4-Way Manifold (Option)

26
BA_v2_eagle_parallel_EN_1-0
funcTion
5.7.1.1 Sorting with NRI 4-way manifold (option)
For the purpose of splitting-up and for better transport
of the sorted coins you have the option of an NRI 4-way
manifold which can be screwed to the coin validator from
the bottom. This manifold is primarily used in AWP and
SWP slot machines.
If the sorting adapter is installed four sorting chutes are
available to you
(cf. Chap. 10.3.2 Manifolds/sorters, p. 52).
Which coin is sorted into which of the up to four chutes
isdeterminedbycustomizedfactoryprogramming.
The following table shows which manifold chute
corresponds to which coin validator chute:
Manifold chute v
2
eagle sorting chute
A 3
B 2
C 1
D 5
Return
Fig. 7: Sorting chutes A–D of
NRI manifold