NSK iCare+ - USING THE iCare+ DEVICE; Setup and Installation

iCare+ Operation Manual 10-8-1 p. 12
ENGLISH
A: Cycle selection button A': Operating light indicators (LEDs) for cycle selected
B: Ext w-o (or Spray) button for selection of the model of the handpiece(s)
C: Instruments selection and Oil volume button (Short or Long mode)
D: Start-up button. This button can also be used to stop the unit during cycle (with a long press).
E: Cycle progress operating light indicators (LEDs)
F: Warning operating light indicators (LEDs) for consumables state and for drawer, air, door state
1, 2, 3, 4: Indicator of the type of instrument (if the indicator is lit: instrument with external spray or without spray)
A
B
A'
E
D
F
1
2
3
6
4
6
C
Figure 5: Control Panel of the iCare+ device