iCare+ Operation Manual 10-8-1 p. 33
4.2.7. Replacing the fuse of the supply inlet
As mentioned in the part 4.1, the fuse(s) have to be changed if blown.
Press down simultaneously and pull the two tabs at the end of the fuse housing in order to unlock it. Remove and
replace the fuses according to their rating. Replace the fuses in the fuse box and insert them in their housing. Push
to lock (see Figure 30).
Remark:
The fuses should be replaced functions of the country of use; the specifications for each type of fuse are summarized
on the following table.
For all the other maintenance operations of your iCare+ device, please contact immediately your NSK retailer.
Figure 30: Fuse box of iCare+ device
To Next Page
Loading...
