iCare+ Operation Manual 10-8-1 p. 30
4.2.1. Cleaning the treatment chamber
The treatment chamber can be easily cleaned, since the door is totally removable.
Thanks to the 2 spring-loaded tabs the door can be easily removed ensuring a
sufficient access to the chamber for the cleaning step.
After that, if necessary disconnect and remove the respective instruments that are
still implemented.
Use a soft cloth or a sponge to clean the chamber and after that to rinse it.
Proceed in the same way with the door.
We advise to use alcohol wipes for this part of the device.
It will ensure to remove with efficacy the possible drops of stains.
4.2.2. Cleaning the external parts
Clean the external parts with a soft cloth, as mentioned in the part 4.1. Do not use scouring agents or highly abrasive
products.
4.2.3. Emptying the used products of the drawer
The drawer should regularly be emptied. The emptying of the drawer is done after each
use, at the end of the day.
In parallel when the drawer is full, the corresponding LED on the Control panel is lit.
First of all start removing the drawer from its housing by sliding it backwards (see Figure 25) and secondly to dispose
of the used products, undo the clips to remove the tray from the drawer (see Figure 26).
Figure 24: Access to the treatment
chamber of iCare+ device
Figure 25: Removal of the
drawer of iCare+ device
To Next Page
Loading...
