NSK iCare+ - Product Implementation

iCare+ Operation Manual 10-8-1 p. 14
ENGLISH
 The pressure of the air supply must not be under 5 bar or above 6 bar. A
pressure sensor detects if the air pressure is too low or too high and stops
the machine. The operator is informed by an operating light indicator
positioned on the Control Panel.
 Do not fold or deform the air supply tube
 If you experience some difficulties during the connection step, please
contact your retailer
 The air filter has an effective filter size of 5µm
3.1.3. Electrical connection
Connect the device by means of a power cord provided into the iCare+ package. This cable is
a Class I cable.
Just insert the power cord in the socket: K, on the iCare+ device's panel.
K
Figure 8: Electrical connection of
iCare+ device
Cut off the air arrival. Connect
the tube coming from the unit
and from the iCare+ device on
the “T” connector. Connect
the compressor’s arrival on
the “T” connector
EXAMPLE OF CONNECTION
DENTAL UNIT
AIR CONNECTION
iCare+ DEVICE
AIR COMPRESSOR
“T” CONNECTOR
Figure 7: Connection of the iCare+ device to the air system