iCare+ Operation Manual 10-8-1 p. 17
3.2.2. Filling the oil tank
Shake well the maintenance Oil. Unscrew the tank's cap (see Figure 12) and pour the Oil in (see Figure 13). Please fill
the tank up to 20 mm from the top edge of the tank. After filling, screw its cap back on.
Always use NSK Oil for handpiece in the iCare+ device to ensure optimal
operating conditions
After filling the tank, be sure to have properly closed its cap
Once the tank is filled and the cap properly attached, close the Top cover. After that you can start connecting the
different instruments.
Figure 12: Unscrewing the Oil tank's cap
of iCare+ device
Figure 13: Filling the Oil tank of iCare+
device
To Next Page
Loading...
