iCare+ Operation Manual 10-8-1 p. 36
CHAPTER 8: BREAK-DOWN GUIDE
The other problems, not previously listed in the chapter 5 (Error messages from operating light indicators) and in the
chapter 7 (Possible failures), are explained in the following chapter.
8.1. Error messages
8.1.1. Liquid sensor
Corresponding LED is lit and a “BIP” signal can be heard. Please change the bottle and push “START” button to fill the
product line.
If the bottle is not empty, the sensor could have detected a bubble into the product line. Please push “START”
button to fill the product line.
8.1.2. Oil sensor
Corresponding LED is lit and a “BIP” signal can be heard. Please open the oil tank and fill it with maintenance oil.
8.1.3. Drawer sensor
Corresponding LED is lit and a “BIP” signal can be heard. Remove the drawer and empty it. Or else, make sure that
the drawer is in appropriate position.
To Next Page
Loading...
