iCare+ Operation Manual 10-8-1 p. 19
To connect a turbine with other connection type, it is necessary to install the corresponding adaptor first (Please
refer to the list of available adaptors into the chapter 10).
Insert the adaptor and screw the ring on firmly; check the positioning
of the different nozzles.
It is necessary to use a specific iCare+ air turbine adaptor. These are especially
designed to deliver the right volume of product required for each instrument.
NSK does not guarantee a good working of the device with any other coupling.
Figure 14: Connection of one turbine
Figure 15: Screwing the ring on the Midwest
coupling
Figure 16: Change of turbine adaptor
To Next Page
Loading...
