NSK iCare+ - Page 7

iCare+ Operation Manual 10-8-1 p. 6
ENGLISH
Caution symbol
This symbol is designed to catch the reader's attention to any text containing vital
safety information. You are asked to read closely and understand properly each of the
sections concerned immediately before using your iCare+ device
Information symbol
Text preceded by this symbol contains useful information for using your iCare+
device
The iCare+ device has been designed in accordance with current safety standards for similar devices. Despite this, it
is essential that a number of important safety measures have to be applied in order to avoid any potential incident
or even accident.
These main safety requests have to be taken into consideration by the user.
 Use the iCare+ device only indoors
 Do not install or use iCare+ device near a naked flame owing to the risk of
explosion
 Do not install or use iCare+ device in direct contact with sunlight
 Ensure that the iCare + device is placed in a ventilated place
 Store iCare+ device at temperature between 0°C and 50°C and humidity rate
under 80%
 Use iCare+ device in a temperate room (22-40°C)
 Do not place n.Cid bottles near a heat source
 Do not turn the device upside down
 Place the device horizontally on a flat surface
 Only use NSK products when operating iCare+ device (n.Clean as cleaning
product, n.Cid as disinfection product, NSK Oil as lubrication product)
 During the installation of iCare+ device, leave a space of 5 cm free on each
side
 Be sure that air supply pressure provided by iCare+ device is set between 5
and 6 bar
 Do not remove the bottles (n.Clean or n.Cid) while iCare+ device is in use
 If not using iCare+ device for a long period, switch of it and cut the air arrival
 Only use NSK components for the maintenance of iCare+ device. The use of
different components may damage the device