Nvidia ConnectX-7 User Manual

12
Related Documentation
MLNX_OFED for
Linux User Manual
and Release Notes
User Manual describing OFED features, performance, band diagnostic, tools content
and configuration. SeeMLNX_OFED for Linux Documentation.
WinOF-2 for
WindowsUser
Manual and Release
Notes
User Manual describing WinOF-2 features, performance, Ethernet diagnostic, tools
content and configuration. SeeWinOF-2 for Windows Documentation.
NVIDIA VMware for
Ethernet User
Manual
User Manual and release notes describing the various components of the NVIDIA
ConnectX® NATIVE ESXi stack. See VMware® ESXi Drivers Documentation.
NVIDIA Firmware
Utility (mlxup) User
Manual and Release
Notes
NVIDIA firmware update and query utility used to update the firmware. Refer to
Firmware Utility (mlxup) Documentation.
NVIDIA Firmware
Tools (MFT) User
Manual
User Manual describing the set of MFT firmware management tools for a single node.
SeeMFT User Manual.
InfiniBand
Architecture
Specification
Release 1.2.1, Vol 2
- Release 1.4, and
Vol 2 - Release 1.5
InfiniBand Specifications
IEEE Std 802.3
Specification
IEEE Ethernet Specifications
PCI Express 5.0
Specifications
Industry Standard PCI Express Base and Card Electromechanical Specifications. Refer to
PCI-SIG Specifications.
LinkX Interconnect
Solutions
LinkX cables and transceivers are designed to maximize the performance of High-
Performance Computing networks, requiring high-bandwidth, low-latency connections
between compute nodes and switch nodes. NVIDIA offers one of the industry’s most
complete line of 10, 25, 40, 50, 100, 200, and 400GbE in Ethernet and EDR, HDR, and
NDR, includingDirect Attach Copper cables (DACs), copper splitter cables, Active
Optical Cables (AOCs) and transceivers in a wide range of lengths from 0.5m to 10km.
In addition to meeting Ethernet and IBTA standards, NVIDIA tests every product in an
end-to-end environment ensuring a Bit Error Rate of less than 1E-15.Read more at
LinkX Cables and Transceivers.
NVIDIA ConnectX-7
Electrical and
Thermal
Specifications
Electrical and Thermal specifications are provided in the "NVIDIA ConnectX-7 Adapter
Cards Electrical and Thermal Specifications" document available at NVOnline following
login.

Nvidia ConnectX-7 Specifications

General

Supported Protocols	Ethernet, InfiniBand
RoHS Compliance	Yes
Ports	1 or 2 ports
Data Transfer Rate	Up to 400 Gb/s
Ethernet Speeds	10/25/40/50/100/200/400
InfiniBand Speeds	400Gb/s
Latency	Sub-600 nanoseconds
Form Factor	OCP 3.0
Product Type	Network Interface Card (NIC)
Power Consumption	Varies by model and configuration