Nvidia ConnectX-7 User Manual

75
Capabilit
ies
MCX755106AC
-HEAT
Secure Boot Enabled, Crypto Enabled
MCX755106AS
-HEAT
Secure Boot Enabled, Crypto Disabled
Electrica
l and
Thermal
Specifica
tions
Voltage: 12V, 3.3VAUX
Maximum current:100mA
Maximum power available through QSFP112 port: TBD
Electrical and Thermal Specifications: TBD
Environm
ental
Temperature Operational 0°C to 55°C
Non-
operational
-40°C to 70°C
Humidity Operational 10% to 85% relative humidity
Non-
operational
10% to 90% relative humidity
Altitude
(Operational)
3050m
Regulato
ry
Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM / KC
RoHS: RoHS Compliant
Notes: a. The ConnectX-7 adapters supplement the IBTA auto-negotiation specification to get better
bit error rates and longer cable reaches. This supplemental feature only initiates when connected to
another NVIDIA InfiniBand product.
b.Typical power for ATIS traffic load.
c. For both operational and non-operational states.
MCX715105AS-WEAT Specifications 
Physical
Adapter
Card Size
PCIe Half Height, Half Length2.71 in. x 6.6 in. (68.90mm x 167.65 mm)
Auxiliary
PCIe
Connection
Card Size
5.09 in. x 2.32 in. (129.30mm x 59.00mm)
Two Cabline CA-II Plus harnesses (white and black)
Interfac
es
SeeSupported Interfaces
PCI Express
Interface
Gen 5.0/4.0: SERDES @ 16/32GT/s, x16 lanes (4.0 and 3.0 compatible)
Optional:AdditionalPCIe x16 Gen 4.0 @ SERDES 18GT/s through the PCIe auxiliary
passive card and CablineSA-II Plusharnesses
The Socket-Direct ready cards kit does not include the PCIe passive auxiliary connection
card and two Cabline SA-II Plus harnesses. For more information, please refer toPCIe
Auxiliary Card Kit.


Nvidia ConnectX-7 Specifications

General

Supported Protocols	Ethernet, InfiniBand
RoHS Compliance	Yes
Ports	1 or 2 ports
Data Transfer Rate	Up to 400 Gb/s
Ethernet Speeds	10/25/40/50/100/200/400
InfiniBand Speeds	400Gb/s
Latency	Sub-600 nanoseconds
Form Factor	OCP 3.0
Product Type	Network Interface Card (NIC)
Power Consumption	Varies by model and configuration