Nvidia ConnectX-7 User Manual

70
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Troubleshooting
GeneralTroubleshooting
Server unable to find theadapter Ensure that the adapter is placed correctly
Make sure the adapter slot and the adapter are
compatible
Install the adapter in a different PCI Express slot
Use the drivers that came with the adapter or
download the latest
Make sure your motherboard has the latest BIOS
Try to reboot the server
The adapter no longer works Reseat the adapter in its slot or a different slot,
if necessary
Try using another cable
Reinstall the drivers for the network driver files
may be damaged or deleted
Reboot the server
Adapters stopped working afterinstalling another
adapter
Try removing and re-installing all adapters
Check that cables are connected properly
Make sure your motherboard has the latest BIOS
Link indicator light is off Try another port on the switch
Make sure the cable is securely attached
Check you are using the proper cables that do not
exceed the recommended lengths
Verify that your switch and adapter port are
compatible
Link light is on, but with nocommunication
established
Check that the latest driver is loaded
Check that both the adapter and its link are set
to the same speed and duplex settings
LinuxTroubleshooting
Environment Information cat /etc/issue
uname -a
cat /proc/cupinfo | grep ‘model name’ | uniq
ofed_info -s
ifconfig -a
ip link show
ethtool <interface>
ethtool -i <interface_of_Mellanox_port_num>
ibdev2netdev
Card Detection lspci | grep -i Mellanox

Nvidia ConnectX-7 Specifications

General

Supported Protocols	Ethernet, InfiniBand
RoHS Compliance	Yes
Ports	1 or 2 ports
Data Transfer Rate	Up to 400 Gb/s
Ethernet Speeds	10/25/40/50/100/200/400
InfiniBand Speeds	400Gb/s
Latency	Sub-600 nanoseconds
Form Factor	OCP 3.0
Product Type	Network Interface Card (NIC)
Power Consumption	Varies by model and configuration