Nvidia ConnectX-7 User Manual

80
MCX713106AC-VEATandMCX713106AS-
VEATSpecifications
Physical
AdapterCard Size:PCIe Half Height, Half Length2.71 in. x 6.6 in. (68.90mm x 167.65 mm)
Interfaces
SeeSupported Interfaces
Gen5.0: SERDES @ 16.0GT/s/32GT/s, x16 lanes (4.0, 3.0, 2.0 and 1.1 compatible)
Networking Ports: Dual-port QSFP112 Ethernet (copper and optical)
Protocol
Support
Data Rate Ethernet 200/100/50/40/25/10/1 GbE
Ethernet Protocols:200GAUI-4 C2M, 200GBASE-CR4, 100GAUI-2 C2M, 100GBASE-CR4,
100GBASE-CR2, 100GBASE-CR1, 50GAUI-2 C2M, 50GAUI-1 C2M, 50GBASE-CR, 50GBASE-R2 ,
40GBASE-CR4, 40GBASE-R2, 25GBASE-R, 10GBASE-R, 10GBASE-CX4, 1000BASE-CX, CAUI-4 C2M,
25GAUI C2M, XLAUI C2M , XLPPI, SFI
Capabilities
MCX713106A
C-CEAT
Secure Boot Enabled, Crypto Enabled
MCX713106A
S-CEAT
Secure Boot Enabled, Crypto Disabled
Electrical
and
Thermal
Specificatio
ns
Voltage: 12V, 3.3VAUX
Maximum current:100mA
Maximum power available through QSFP112 port: 11W per port (Not thermally supported),
5.1W per port(Thermally supported)
Electrical and thermal specifications are provided in NVIDIA ConnectX-7 Electrical and
Thermal Specificationsdocument, which is available at NVOnline following login.
Environmen
tal
Temperature Operational 0°C to 55°C
Non-
operational
-40°C to 70°C
Humidity Operational 10% to 85% relative humidity
Non-
operational
10% to 90% relative humidity
Altitude
(Operational
)
3050m
Regulatory
Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM / KC
RoHS: RoHS Compliant

Nvidia ConnectX-7 Specifications

General

Supported Protocols	Ethernet, InfiniBand
RoHS Compliance	Yes
Ports	1 or 2 ports
Data Transfer Rate	Up to 400 Gb/s
Ethernet Speeds	10/25/40/50/100/200/400
InfiniBand Speeds	400Gb/s
Latency	Sub-600 nanoseconds
Form Factor	OCP 3.0
Product Type	Network Interface Card (NIC)
Power Consumption	Varies by model and configuration