1.
2.
3.
1.
2.
3.
The adapter is installed in a system that operates with voltages that can be lethal. Before
uninstalling the adapter card, please observe the following precautions to avoid injury and prevent
damage to system components.
Remove any metallic objects from your hands and wrists.
Using an ESD strap or other antistatic devices is strongly recommended.
Turn off the system and disconnect the power cord from the server.
Card Removal
Verify that the system is powered off and unplugged.
Wait 30 seconds.
To remove the card, disengage the retention mechanisms on the brackets (clips or screws).
Please note that the following images are for illustration purposes only.
To Next Page
Loading...
