Burning MFA2
Images
Enables the user to extract (i.e. unzip) 4MB images from MFA2
archive, that matches the device type and device PSIB.
If there are more than one matching image, the user may use –
latest flag and burn the latest firmware, or choose the required
image from the user menu.
Note: This feature is enabled when the "enable-fw-mgr" flag is set
at the configure steps (see Flags Dependencies)
For further information see Burning the MFA2 Images.
All
Verifying MFA2
Archive
Enables the user to verify that a given MFA2 archive contains the
image that matches the given device.
Note: This feature is enabled when the "enable-fw-mgr" flag is set
at the configure steps (see Flags Dependencies)
For further information see Verifying MFA2 Archive.
All
Binary Image
Comparison
Enables the user to verify a firmware image on a device which
operates in livefish mode by comparing it with an existing binary
firmware file. For further information see Comparing the Binary
Image.
Linux/
FreeBSD
SDK Added two new libraries to the WinMFT package for developing
software that interacts with Mellanox devices
The new SDK includes the mtcr and fastfwreset libs and headers.
Windows
mstresourcedu
mp
Extracts and prints data segments generated by the firmware. It is
supported in 5th generation NIC’s devices.
The dump output is used by Mellanox for debug and
troubleshooting. For further information see mstresourcedump
Utility.
Note: This utility is supported only on Python 3.0 and up.
Linux
Windows
mstlink Added the option of using "--json" flag. The output of the tool when
using this flag includes all options & commands in JSON format
and prints it.
mstreg Added a new registry key: NCFG.
This register is used to enable/disable device features and it is
supported when ICMD_QUERY_CAPABILITY.ncfg_reg==1.
For further information see mstreg Utility
All
Rev. 4.13.0
Dynamic MSI-X
Allocation
Dynamic MSI-X allocation capability allows users to control the
number of MSI-X vectors allocated to a Virtual Function, thus,
improve performance in guests systems.
For further information of how to set this capability, see the
"DYNAMIC_VF_MSIX_TABLE" parameter, in sectionMFT Supported
Configurations and Parameters.
Windows
Fast Firmware
Reset
Added support for a fast firmware reset (< 1 second) to ConnectX-5
adapter cards.
Windows
To Next Page
Loading...
Need help?
General