mstlink Added support for reading the "Link Downed Counter" and "Link
Error Recovery Counter" in the mlxlink utility when using InfiniBand
protocol only.
All
mstlink Added support for HDR PCIe grades in the EYE Opening Info in the
mlxlink utility.
All
mstlink Added a new flag (show links) to define the valid PCIe links. For
further information, refer to mstlink Utility examples.
All
mstconfig Added the ATS_ENABLED TLV param. When set to TRUE, the device
will support Address Translation Service(ATS).
All
mstfwreset Added save/restore ATS PCIE capability. All
mstarchive Added support for MFA2 query using the mstarchive tool. For
further information refer to mstarchive – Binary Files Compression
Tool.
All
fwtrace fwtrace is now supported in non-secured mode as well. Linux
Preboot Boot
Settings
Updated the LEGACY_BOOT_PROTOCOL settings, added an NVME
option. For further information refer to mstconfig Supported
Configurations and Parameters.
All
mstfwreset Added a new reset option (reset-type) to the reset command of
mlxfwreset. The user can see the supported reset-types by using
the query command.For further information refer to Copy of
mstfwreset – Loading Firmware on 5th Generation Devices Tool.
All
mstconfig Added the VF_VPD_ENABLE parameter to mstconfig. When set, the
VPD capability is exposed to Virtual Functions.
All
Rev. 4.12.0
mstfwmanager Supports listing the contents of images archive. When running this
command the tool will list all firmware images within this PLDM
package for each image it displays.
All
mstlink Displays and configures port related data at the physical layer. All
mstfwtrace Extracts and prints trace messages generated by the firmware of 5th
generation devices. This tool supports secure firmware flow only.
Linux
mstreg Exposes supported access registers, and allows users to obtain
information regarding the registers fields and attributes, and to set
and get data with specific register.
All
mstflint Added image-reactivation feature which re-assigns the image
signature to the previous image (in case the new image is faulty)
enabling "fwreset" functionality or to burn a new image.
All
.deb Package
Name
Changed the name of *.deb files from
“mst-<version>.amd64.deb”
to
"mst_<version>_amd64.deb”
e.g., from
mst-4.11.0-34.amd64.deb
to
mst_4.11.0-34_amd64.deb
Linux
General Added support for Spectrum-2 based switch systems. All
mstfwmanager Enabled the option to query PLDM images in mstfwmanager. All
To Next Page
Loading...
Need help?
General