.deb Package
Name
As of mstflint v4.12.0, the name of *.deb files will be changed from
“mstflint-<version>
.
amd64.deb” to “mstflint_<version>_amd64.deb”
e.g., from mstflint-4.10.0-104.amd64.deb to
mstflint_4.10.0-104_amd64.deb
All
Supported
Devices
Added support for Mellanox Quantum switch systems and ConnectX-6
Ready adapter cards.
For further information on the ConnectX-6 adapter cards, please
contact Mellanox Support.
All
mstarchive tool The mstarchive tool allows the user to create a file with the mfa2
extension. The new file contains several binary files of a given
firmware for different adapter cards.
For further information, refer to section mstarchive.
All
mstprivhost The ability to restrict the hosts from configuring the NIC. Meaning, only
the Arm side will have the privilege to configure the NIC.
Note: This utility is supported in BlueField devices only.
All
mstconfig in
BlueField
Enables the user to manage (grant/restrict) mstconfig configuration
privileges for BlueField Arm systems.
All
Bug Fixes See MFT Bug Fixes History All
Rev. 4.10.0
ESXi Added support for ESXi 6.7. ESXi
FreeBSD Added support for verbose output when running "mst status" in
FreeBSD.
FreeBSD
mstfwreset Enabled mstfwreset loading/unloading of the driver per a specific
device in Linux OSes.
Note: On Multi Host devices with firmware version lower than 1x.
23.xxxx, the flag "--pci_link_downtime 2.5" must be added to
mstfwreset
Linux
Secure
Firmware
mstflint now handles all the burn parameters when MCC is enabled
and displays the secure-FW CS tokens.
All
Supported
Devices
[Beta] Added support for BlueField™ SmartNIC. All
mstconfig Added the option to query partial parameters All
To Next Page
Loading...
Need help?
General