•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
mstconfig Added the following new parameters:
FLEX_PARSER_PROFILE_ENABLE
ECPF_ESWITCH_MANAGER
ECPF_PAGE_SUPPLIER
SAFE_MODE_ENABLE
SAFE_MODE_THERSHOLD
BOOT_UNDI_NETWORK_WAIT
All
Bug Fixes See MFT Bug Fixes History Linux
Rev. 4.9.1
mstfwreset Added support for mstfwreset in Power9 platforms. Linux
Rev. 4.9.0
mstfwreset Added support for a hot swap (or hot plug) of the PCIe slot. Linux
Secure
Firmware
Update
Added support for Secure Firmware Update to ConnectX-4 adapter
cards.
All
Enabled signing the package with an RSA 4096 bit keys. All
Added support for setting the GUIDs when Secure Firmware Update is
enabled.
All
mstconfig Added the following mstconfig configuration parameters:
AUTO_RELOAD
DRIVER_SETTINGS
EXP_ROM_PXE_ENABLE
EXP_ROM_UEFI_ARM_ENABLE
EXP_ROM_UEFI_X86_ENABLE
INTERNAL_CPU_MODEL
IPV4
IPV6
PCI_DATA_WR_ORDERING_MODE
PXE_UNDI
STATUS_UPDATE
TCP
TCPIP
TRACER_ENABLE
All
mstlink Added support for force speed configuration. All
Added support for the PEPC (show_external_phy) register. All
mstdump Added support for nvlog dump. All
Rev. 4.8.0