•
•
•
•
mst Added support for adding remote devices in mst remote when the
target machine does not have an MST kernel loaded.
Linux
mstcables Added the option to dump the data from all readable pages. All
Added support for burning cable firmware on In Service Firmware
Update (ISFU) supporting cables.
All
Added support to access the cable via the MTUSB, when the cable is
connected to a compatible board.
All
mstfwreset Added support for MultiHost platforms. All
Rev. 4.6.0
Adapter Cards Added support for ConnectX-5/ConnectX-5 Ex adapter cards.
Note: ConnectX-5/ConnectX-5 Ex adapter cards are currently at Beta
level.
All
mstconfig Added an option to query active (current) configurations in mstconfig. All
Added new parameters in VPI settings configuration: XFI_MODE,
PHY_TYPE, FORCE_MODE
Added a new parameter to the PCI configuration
NON_PREFETCHABLE_PF_BAR
mstburn Added the ability to use mstvpd to read the device VPD when using
mstburn.
Linux,
Windows,
VMware
ESXi
fwreset Added support for fwreset in PPC64 and PPC64LE platforms. Linux
Rev. 4.5.0
General Added support for Innova IPsec 4 Lx EN /Innova Flex 4 Lx EN Linux
mstflint package size has been reduced in Linux by separating the
architecture specific RPMs, and in ESXi, by moving relevant tools to
the OEM package.
Linux /
ESXi
mstcables Enhanced cable query capabilities. Added the additional registers
below for debug purposes when running the query (-q) flag:
device technology
identifier
wavelength/attenuation
speed/compliance
All
To Next Page
Loading...
Need help?
General