NXP Semiconductors PN544 C2 - Page 112

NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 112 of 172
Table 105. Jewel Command Description For NDEF Card (bit 4 of HRO = 1)
Value Description Data
0x00 ReadALL
Byte 1..2 : 0x00
Byte 3..6 : card ID
0x01 Read1
Byte 1 : address
Byte 2 : 0x00
Byte 3..6 : card ID
0x02 Read8
Byte 1 : address
Byte 2..9 : 0x00
Byte 9..12 : card ID
0x53 Write1E
Byte 1 : address
Byte 2 : data to write
Byte 3..6 : card ID
0x54 Write8E
Byte 1 : address
Byte 2..9: data to write
Byte 9..12 : card ID
0x1A Write1NE
Byte 1 : address
Byte 2 : data to write
Byte 3..6 : card ID
0x1B Write8NE
Byte 1 : address
Byte 2..9: data to write
Byte 9..12 : card ID
0x78 RID Byte 1..6 : 0x00
0x10 Read Seg
Byte 1..9: 0x00
Byte 9..12 : card ID
others RFU