NXP Semiconductors PN544 C2 - System Management

NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 45 of 172
Fig 30. After First Setup – Default state
9.3 System Management
This chapter describes the System Management of PN544.
The host could manage the management of the system through a dedicated gate
‘PN544Mgt’.
Table 27. PN544 System Management Gate
Gate G
ID
PN544Mgt gate ‘90’
Using this gate the host is able to:
• Put the system into “Autonomous” mode. Autonomous mode means that system
(PN544 + secure elements) will work without any interaction with the host. In this
mode only Emulation feature is supported (according to previous configuration). This