NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 74 of 172
9.5.2.2 Reader use case
The ho
st shall set the parameters of the SwpMgt gate as described in the previous
paragraph.
The UICC shall behave as described in HCI specification.
• The UICC creates and open the pipe between the reader gates and reader RF gates.
The host must use the command Polling Loop to start the reader mode. (To be detailed
in ‘Polling Loop’ para
graph).
To Next Page
Loading...