NXP Semiconductors PN544 C2 - UICC Dependency for PAYPASS Compliance

NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 77 of 172
9.5.3 UICC dependency for PAYPASS Compliance
In order to fit with PAYPASS requirements, the following registry has to be correctly set
by UICC:
Table 63. Type A Card RF Registry for PAYPASS
Id Name Access
Right
Comment Length Recommended
Value
'09' DATARATE_MAX RW Maximum data rate supported
(Restrict to 106 Baud-rate)
3 0x00 00 01
'06' FWI RW Frame waiting time as defined in ISO/IEC 14443-4 for type A 1 0x07
Table 64. Type B Card RF Registry for PAYPASS
Id Name Access
Right
Comment Length Recommended
Value
'06' DATARATE_MAX RW Maximum data rate supported
(Restrict to 106 Baud-rate)
3 0x00 00 01
'04' ATQB ->FWI(*) RW Frame waiting time as defined in ISO/IEC 14443-3 for Type B 1 0x07
(*): For Type B Card RF, FWI is part of PROTO_INFO byte. PROTO_INFO is the 4
th
byte
of ATQB bytes.