NXP Semiconductors PN544 C2 - 10 Practical Approach on PN544 HCI; Reading PN544 Version Register

NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 163 of 172
10. Practical Approach on PN544 HCI
For debug of your system we give a first short idea how to verify your host interface
connection of PN544 as well as the validation of your chip itself by reading out the
version numbers.
10.1 Reading PN544 Version Register
As host we understand here a PC based solution (SCR Tester) with a PN544 Demo
Board attached.
Please refer to ETSI HCI specification [1] chapter 8 (HCI procedures) as well for more
information.
Host
(PC)
PN544
Administration
Gate
PN544
Identity
Management
Gate
PN544
ADM_CLEAR_ALL_PIPE
ANY_OPEN_PIPE
ANY_OK
ANY_OK
ADM_CREATE_PIPE
ANY_OK(P
ID
)
ANY_OPEN_PIPE(PID)
ANY_OK
ANY_GET_PARAMETER(VERSION_SW)
ANY_OK(VERSION_SW)
ANY_GET_PARAMETER(VERSION_HARD)
ANY_OK(VERSION_HARD)
(3) PN544 identifiers
Fig 75. Read PN544 versions