NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 116 of 172
Value Event Description
‘05’
NXP_EVT_NFC_CONTINUE_MI
This event is sent to the host to indicate the remote
peer acknowledged the previous Meta-chained
packet and then the host can send the next one.
The NXP_EVT_NFC_ACTIVATED event has the following parameter:
Table 114. NFCIP-1 Activated Event
Description Length
Mode 1
• Mode indicates in which mode the current activation as be done
− 0x00: Passive mode
− 0x01: Active
The NXP_EVT_NFC_SND_DATA event has the following parameter:
Table 115. NXP_EVT_NFC_SND_DATA Parameters
Description Length
MI 1
Data N
• MI indicates Multiple Information chaining information (activated if set to 1)
• Data which are received from the peer
The NXP_EVT_NFC_RCV_DATA event has the following parameter:
Table 116. NXP_EVT_NFC_RCV_DATA Parameters
Description Length
RF error indicator 1
MI 1
Data N
• RF error indicator:
Table 117. RF error indicator Description
Value Description
0x00 no RF error
To Next Page
Loading...