NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 145 of 172
Fig 74. Switch to Download mode
Note: WRITE, READ, CHECK & RESET command are part of the Download protocol
documented in the dedicated Application Note [8].
WRITE com
mand is mandatory to use,
READ & CHECK commands are optional to cross check the consistency of the
EEPROM.
RESET command is used to go out of the Download mode; this command can be
replaced by a Hardware reset
To Next Page
Loading...