NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 34 of 172
Table 12. HCI Gate Identity Management
Gate Identity Management Status
No specific command for this gate
Table 13. HCI Gate Loopback
Gate Loop-Back Status
EVT_POST_DATA Supported (fragmented message supported up
to 255 bytes)
Table 14. HCI Gate Reader A
Gate Reader A Status
WR_XCHGDATA Supported (fragmented message supported up
to 260 bytes)
EVT_READER_REQUESTED Supported
EVT_END_OPERATION Supported
EVT_TARGET_DISCOVERED Supported
Table 15. HCI Gate Reader B
Gate Reader B Status
WR_XCHGDATA Supported (fragmented message supported up
to 260 bytes)
EVT_READER_REQUESTED Supported
EVT_END_OPERATION Supported
EVT_TARGET_DISCOVERED Supported
Table 16. HCI Gate Card Emulation A
Gate Card Emulation Type A Status
EVT_SEND_DATA Supported in emission and reception
(fragmented message supported up to 261
bytes)
EVT_FIELD_ON Supported
EVT_CARD_DEACTIVATED Supported
EVT_CARD_ACTIVATED Supported