NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 87 of 172
Fig 49. Emulation Phase only
Note: From a functional point of view, this mode is equivalent to the previous mode: ‘No
phase started’.
One Pause phase only:
If only a Pause phase is enabled, PN544 can stay in an inactive mode (no Reader action,
no Card Emulation). To save power, the default power mode should be set to standby.
Fig 50. Pause Phase only
Note: Such a setup can be useful to disable the Card Emulation functionality without any
access to SWP or NFC-WI registry.
To Next Page
Loading...