Oki C3400N - Eject Roller

43163501TH Rev.1 70 /
Oki Data CONFIDENTIAL
4.2.15 Eject roller
(1) Remover the guide eject assembly 1. (See Subsection 4.2.14)
(2) Remove two claws A to divide them into the guide eject lower 2 and the guide eject upper
3.
(3) Detach a claw B, three gear idle ejects 4. Remove the shaft assembly eject (FD) 5 and the
shaft assembly eject (FU) 6.
(4) Remove the eject sensor 7, and the lever eject sensor 8 from the guide eject lower 2.
Figure 4-2-15 Eject roller
1
5
6
8
7
3
4
2
View A
View A
claws B
Claws A