Oki ES5432 - Adjusting Volume

- 11 -
1. Basic Operations
Adjusting Volume
The volume of the sounds which are emitted in the following conditions can be adjusted in
four levels.
• When a paper jam occurs
• AirPrint Buzzer Volume
1
Press the button on the operator panel repeatedly to select [Setting] and
press the (ENTER) button.
2
Press the button once to select [Admin Setup] and press the (ENTER)
button.
3
Enter the administrator password, and then press the (ENTER) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the or button to select [Manage Unit] and press the (ENTER)
button.
5
Check that [Sound Control] is selected, and then press the (ENTER)
button.
6
Press the or button to select the item you want to adjust and press the
(ENTER) button.
7
Press the or button to select the volume level and press the
(ENTER) button.
8
Press the (ONLINE) button to return to the standby screen.