Oki ES5432 - Adjusting Color Balance (Density); Correcting Density Manually

- 44 -
2. Print
This machine automatically adjusts color registration when an image drum cartridge is
replaced or when 500 sheets are printed. You can manually adjust color registration from the
operator panel if necessary.
1
Press the button on the operator panel repeatedly to select [Setting] and
press the (ENTER) button.
2
Press the button once to select [Admin Setup] and press the (ENTER)
button.
3
Enter the administrator password, and then press the (ENTER) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [Print Setup] and press the (ENTER) button.
5
Press the button to select [Color Menu] and press the (ENTER) button.
6
Press the button to select [Adjust Density] and press the (ENTER)
button.
7
When [Execute] is displayed, press the (ENTER) button.
Adjusting density starts.
When you adjust the shade to suit your preferences, operate from the operator panel.
To specify, darken or lighten pale part (Highlight), middle tone part (Mid-tone), and dark part
(Dark) of each color.
This section describes how to adjust for cyan. When adjusting other colors, perform the
same procedure to all colors and parts you want to adjust.
1
Press the button on the operator panel repeatedly to select [Setting] and
press the (ENTER) button.
2
Press the button once to select [Admin Setup] and press the (ENTER)
button.
3
Enter the administrator password, and then press the (ENTER) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [Print Setup] and press the (ENTER) button.
5
Press the button to select [Color Menu] and press the (ENTER) button.
6
Press the or button to select [Color Tuning/Print Pattern] and press the
(ENTER) button.
7
When [Execute] is displayed, press the (ENTER) button. Press the
(ENTER) button again to print the color adjustment pattern.
8
Press the (BACK) button to go back to the [Color Menu] screen.
9
Press the button to select [Cyan Tuning] and press the (ENTER)
button.
10
Press the button to select [Cyan Highlight] and press the (ENTER)
button.
11
Enter the setting value, and then press the (ENTER) button.
Correcting Density Manually Adjusting Color Balance (Density)