Oki ES5432 - Print from USB Memory Setup; Print Setup

- 113 -
5. Operating Management/ Specifications
• Print Menu
• Color Menu
• System Configuration Menu
• PCL Setup
• PS Setup
• XPS Setup
• SIDM Setup
• IBM PPR Setup
• EPSON FX Setup
• Private Print Setup
Print Menu
•Print Setup
Print From USB Memory Setup
Item Factory default setting Description
Default Settings Color Mode Color Select Color / Mono
(Grayscale).
Paper Feed Tray 1 Specify a paper tray to use.
Copies 1 Sets the number of copies.
Duplex OFF or ON(Duplex) Turns the duplex printing
function on or off.
[OFF]: simplex printing
[Long Edge Bind]: duplex
printing for long-edge
binding
[Short Edge Bind]: duplex
printing for short-edge
binding
Binding Long Edge Bind Set binding method of both-
side print.
Fit ON Specify whether to match
the paper.
Print Setup
Item Factory
default
setting
Description
Copies 1 Sets the number of copies. For local printing, this setting is
invalid except for demo data.
Available range: 1 to 999
Duplex OFF or
ON(Duplex)
Turns the duplex printing function on or off.
[OFF]: simplex printing
[Long Edge Bind]: duplex printing for long-edge binding
[Short Edge Bind]: duplex printing for short-edge binding
Media Check Enable Sets whether to check an inconsistency between the page size
and the paper size in the tray.
Override A4 / Letter Yes Automatically switches paper to print from A4 to Letter if A4
document is to be printed with A4 paper run out and Letter
paper loaded, from Letter to A4 if Letter document is to be
printed with Letter paper run out and A4 paper loaded.
Resolution 600dpi Sets the resolution.
Toner Save Toner Save
Level
OFF Sets the amount of toner to be saved.
This setting is enabled when printing and printing from USB
Memory.
Color All [All]: Toner Save is applied to all colors including 100% black.
[Except100%Black]: Toner Save is applied to all colors other
than 100% black.
This function is only applied to the print function.
Mono-Print Mode Auto Sets the print mode for black-and-white pages.