- 124 -
5. Operating Management/ Specifications
*1 A message is displayed to confirm the equipment restarts. Select [Yes] to continue. Select [No] to cancel.
User Install
Item Factory
default
setting
Description
Time Zone 00:00 Sets the time GMT zone.
Available range: -12:00 to +13:00 (15 minutes
/ increment)
Daylight Saving ON Sets whether to enable the Daylight Saving
mode.
Time Setup Auto Setup SNTP Server
(Primary)
Sets the SNTP server to use for setting the
current date and time. You can enter up to
64 characters.
SNTP Server
(Secondary)
Manual Setup 2001/01/01 0:00 Sets the current date and time manually.
Power Setup Auto Power Off Auto Config Sets the behavior of Automatic Power Off.
Power Supply Return State Continue Sets a power supply method at the time of
recovery from the power failure.
Select [Manual] if you do not want to make the
machine automatically to turn on after the
recovery.
Office Document Mode Mode1 This mode allows to always enable the toner
save function.
To forcibly enter the machine in toner save
mode, select Mode2.
High Humid Mode OFF Sets whether to enable the humidity mode.
Selecting [Enable] reduces curl generated
while printing.
Quiet Mode OFF Sets whether to reduce the printing noise.
Setting to [ON] affects printing speed.
Drum Near Life Timing 1000 Sets the timing for the near life warning for the
drum cartridges.
Fuser Near Life Timing 1000 Sets the timing for the near life warning for the
fuser unit.
Belt Near Life Timing 1000 Sets the timing for the near life warning for the
belt unit.
Wireless Module Disable Sets whether to enable or disable wireless
LAN.
Erase Privacy Data*
1
Execute Deletes the registered privacy data.
• Values set to the Admin Password and other
menu items.
• Various histories
• Access control information and user
information registered to the device
Business Phone
Setup
Business Phone Cooperation Disable Sets whether to enable or disable Business
Phone Cooperation.
Connection IP Address 0.0.0.0 Sets the IP address of the connected device.
Connection Port No. 59000 Sets a port number of the connected device.
Item Factory
default
setting
Description
To Next Page
Loading...
