Oki ES5432 - Initializing the Network Settings

- 166 -
6. Network
6
Check that [Network Setting] is selected, and then press the (ENTER)
button.
7
Check that [Enabling Default Gateway] is selected, and then press the
(ENTER) button.
8
Press the button to select [Wired] or [Wireless(Infrastructure)] and press
the (ENTER) button.
This procedure initializes all the network settings.
Initializing from Setting Menus of this Machine
You can restore the network settings to the factory default settings.
1
Press the button on the operator panel repeatedly to select [Setting] and
press the (ENTER) button.
2
Press the button once to select [Admin Setup] and press the (ENTER)
button.
3
Enter the administrator password, and then press the (ENTER) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [Network Menu] and press the (ENTER)
button.
5
Check that [Network Setup] is selected, and then press the (ENTER)
button.
6
Press the button to select [Factory Default] and press the (ENTER)
button.
7
When [Execute] is displayed, press the (ENTER) button.
8
Press the (ONLINE) button to return to the standby screen.
Initializing the Network Settings