Oki MICROLINE ML521 - Justification Commands (Epson)

Chapter 8: Horizontal Control Commands 83
Justification Commands (Epson)
⻬ ML320 E/I, ML321 E/I ⻬ ML320 Turbo, ML321 Turbo ⻬ ML520, ML521
⻬ ML390 Turbo, ML391 Turbo ⻬ ML590, ML591
Function ASCII Dec Hex
Select Left Justification ESC a 0 27 97 0 1B 61 00
Select Center Justification ESC a 1 27 97 1 1B 61 01
Select Right Justification ESC a 2 27 97 2 1B 61 02
Select Full (Left & Right) Justification ESC a 3 27 97 3 1B 61 03
These commands let you specify the alignment of text on the page: along the left or right
margin, centered between the margins, or along both the left and right margins. When you are
using center, right or full justification, the backspace character (ASCII BS, decimal 8) and
horizontal tabs won't function. If you're using full justification, use a carriage return only at the
end of a paragraph, not at the end of each line.