Chapter 9: Vertical Control Commands88
33 Carriage return only
34 Forward line feed, no carriage return
35 Forward line feed with a carriage return
48 Reverse line feed, no carriage return
49 Reverse line feed with a carriage return
Fine Line Feed Commands (IBM/E/ML)
⻬ ML320 E/I, ML321 E/I ⻬ ML320 Turbo, ML321 Turbo ⻬ ML520, ML521
⻬ ML320 Std., ML321 Std.
Function IBM Epson ML
Perform n/216"
Line Feed
ASCII: ESC J n
Dec: 27 74 n
Hex: 1B 4A n
ASCII: ESC J n
Dec: 27 74 n
Hex: 1B 4A n
Not applicable
Perform n/144"
Line Feed
ASCII: ESC % 5 n
Dec: 27 37 53 n
Hex: 1B 25 35 n
ASCII: ESC % 5 n
Dec: 27 37 53 n
Hex: 1B 25 35 n
ASCII: ESC % 5 n
Dec: 27 37 53 n
Hex: 1B 25 35 n
⻬ ML390 Turbo, ML391 Turbo ⻬ ML590, ML591
Function IBM Epson ML
Perform n/180"
Line Feed
ASCII: ESC J n
Dec: 27 74 n
Hex: 1B 4A n
ASCII: ESC J n
Dec: 27 74 n
Hex: 1B 4A n
Not applicable
Perform n/360"
Line Feed
ASCII: ESC % 4 n
Dec: 27 37 52 n
Hex: 1B 25 34 n
ASCII: ESC ] n
Dec: 27 93 n
Hex: 1B 5D n
Not applicable
Unlike the ESC % 5 n command, the ESC J n command is not accompanied by a carriage
return, and, in the IBM and Epson emulations, does not cancel one-line double width printing.
In the IBM and Epson emulations, the value of n can be any whole number from 0 to 255.
In the MICROLINE Standard emulation, the value of n can be any whole number from 0 to
127.
If you use n = 0, no line feed will be performed.
To Next Page
Loading...
