Chapter 9: Vertical Control Commands100
Skip Over Perforation On/Off Commands (ML)
⻬ ML320 Std., ML321 Std. ⻬ ML320 Turbo, ML321 Turbo ⻬ ML520, ML521
Function ASCII Dec Hex
Skip Over Perforation On ESC % S 1 27 37 83 49 1B 25 53 31
Skip Over Perforation Off ESC % S 0 27 37 83 48 1B 25 53 30
If the skip over perforation is set to Yes (factory default is No) on the menu, the printer will
automatically skip an inch from the bottom of one page to the top of the next.
To Next Page
Loading...
