Oki MICROLINE ML521 - Outline;Shadow Commands (IBM;E)

Chapter 4: Character Style Commands38
Parameters D
1
and D
2
Parameter D
1
is used to set the type of score and parameter D
2
is used to set the attributes, as
indicated in the table.
Table 33: Epson ESC ( - Command —
Score Styles for D
1
and D
2
Values
D
1
D
2
Score Style
1 1 Continuous, single underline
2 1 Continuous, single strike-through
3 1 Continuous, single overscore
1 2 Continuous, double underline
2 2 Continuous, double strike-through
3 2 Continuous, double overscore
1 5 Dashed, single underline
2 5 Dashed, single strike-through
3 5 Dashed, single overscore
1 6 Dashed, double underline
2 6 Dashed, double strike-through
3 6 Dashed, double overscore
Using a value of 0 for D
2
will cancel the score mode.
Note: Scores can only be used for printing characters: they can't be used to print line graphics
Outline/Shadow Commands (IBM/E)
⻬ ML390 Turbo, ML391 Turbo ⻬ ML590, ML591
Function ASCII Dec Hex
Outline Printing On ESC q 1 27 113 49 1B 71 31
Shadow Printing On ESC q 2 27 113 50 1B 71 32
Outline and Shadow Printing On ESC q 3 27 113 51 1B 71 33
Outline and/or Shadow Printing Off ESC q 0 27 113 48 1B 71 30
The outline feature prints characters as outlines with hollow center. The shadow feature prints
characters with a shadow behind them. Combining the features produces outline characters
with a shadow behind them. These features can be used to produce more interesting and stylish
headings. They can be combined with emphaiszed and/or enhanced printing, double width,
etc., for an even more striking effect.
Note: Outline and shadow can only be used for printing characters: they can't be used to
print line graphics.