Oki MICROLINE ML521 - Cut Sheet Feeder (CSF) Commands; CSF Commands (IBM;E); Bin Select Command for Dual bin CSF (IBM;E); CSF Commands (ML)

Chapter 12: Miscellaneous Commands126
Cut Sheet Feeder (CSF) Commands
CSF Commands (IBM/E)
⻬ ML320 E/I, ML321 E/I ⻬ ML320 Turbo, ML321Turbo ⻬ ML520, ML521
⻬ ML390 Turbo, ML391 Turbo ⻬ ML590, ML591
Function ASCII Dec Hex
Insert Sheet ESC EM I 27 25 73 1B 19 49
Eject Sheet ESC EM R 27 25 82 1B 19 52
The insert page command feeds a sheet of paper from the cut sheet feeder (CSF) to the top of
form position. If CSF paper is already in the printer, the printer will eject the page and load
another.
The eject page command prints data in the print buffer and ejects the page. A line feed code
(LF) at the end of the page causes the next page to feed into the printer automatically.
Bin Select Command for Dual-Bin CSF (IBM/E)
⻬ ML520, ML521
⻬ ML590, ML591
Function ASCII Dec Hex
Select Bin 1 ESC EM 1 27 25 49 1B 19 31
Select Bin 2 ESC EM 2 27 25 50 1B 19 32
The bin select command chooses the active bin when the optional dual-bin cut sheet feeder is
installed.
CSF Commands (ML)
⻬ ML320 Std., ML321 Std. ⻬ ML320 Turbo, ML321Turbo ⻬ ML520, ML521
Function ASCII Dec Hex
Insert Sheet ESC S 27 83 1B 53
Eject Sheet ESC V 27 86 1B 56
The insert page command feeds a sheet of paper from the cut sheet feeder (CSF) to the top of
form position. If CSF paper is already in the printer, the printer will eject the page and load
another.
The eject page command prints data in the print buffer and ejects the page. A line feed code
(LF) at the end of the page causes the next page to feed into the printer automatically.