Index
142
L
Latin American character
set commands.................. 9-10
Left
justification command.......83
margin commands. 69-72, 76
Line
character set command........8
feed commands........... 87-89
feed, graphics....................60
spacing commands...... 90-93
Lotus 1-2-3...............................4
M
Margin setting
commands............... 69-72, 76
MICROLINE Standard
command
summary............xxxii-xxxvi
emulation drivers............. 1-2
Microsoft
Windows.............................3
Word...................................3
Most significant bit
commands.........................128
Move to left/right
commands..................... 76-81
MSB commands...................128
Multilingual code page
command...................... 11-13
Multiple print positions
command...................... 77-78
N
NLQ print mode
command...................... 29-32
Norway code page
command...................... 10-11
Norwegian character set
commands..................... 11-13
O
Okidata Microline Std command
summary.................xxxii-xxxvi
Okidata software drivers....... 2-3
Overscore commands ............37
P
Page
format command...............98
length commands.........85-86
Paper-out sensor
commands.........................128
Parallel interface..................133
Pitch commands...............15-19
Plotter graphics
commands................55-57, 63
Portugal code page
command.......................11-13
Postnet bar code
commands.................112, 124
Print
quality commands........29-32
suppress mode
commands....................129
Printer drivers .......................1-2
Programming graphics .....54, 62
Proportional spacing
commands...........................25
Publisher character set
commands........................9-10
Q
Quadruple density graphics
commands...........54-56, 62-63
R
Raster graphics command......66
Reassign graphics
command......................57, 64
Relative dot position
commands......................79-80
Reverse line feed
commands...........................89
Right
justification command.......83
margin commands........69-72
ROM to RAM copy
commands.........40, 43, 45, 49
S
Serial interface..............134-135
Single density graphics
commands..........54-56, 62-63
Skip down command.............96
Skip over perforation
commands...................99-100
Software I-prime command..131
Spanish character set
commands.......................9-10
Stop printing command .......131
Subscript commands........20, 24
Superscript commands.....20, 24
Swedish character set
commands.......................9-10
T
Tab commands
horizontal....................73-76
vertical.........................93-96
Top of form commands..........98
U
Underline commands............36
Uni-directional print
commands.......................... 82
Upper range control code
commands.......................... 13
USA code page
command.......................11-13
Utility print mode
commands.....................29-32
V
Vertical
control commands.....85-100
format unit commands.95-96
tab commands.............93-96
unit setting command .......93
W
Width, double,
commands...............21, 22-24
Windows.................................3
Word, Microsoft...................... 3
WordPerfect............................3