Page: 10
Service Guide ML395/395C
Chapter 1 Product Specifications
1.8 OPTIONS
1.8.01 Cut Sheet Feeders
CSF 3001 - Single bin Cut Sheet Feeder
CSF 3002 - Dual bin Cut Sheet Feeder
1.8.02 Pull Tractor Assembly
The Pull Tractor Assembly is required for bottom feeding if the optional Bottom Push Tractor Unit is not
installed.
1.8.03 Bottom Push Tractor Unit
Card Stock and Labels
NOTE: A Pull Tractor Assembly or Bottom Push Tractor must be used to feed labels.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
To Next Page
