OKIDATA ML395C - Space Belt

Page: 49
Service Guide ML395/395C
Chapter 3 Maintenance & Disassembly
3.2.15 Space Belt
1. Remove the printhead (3.2.01).
2. Remove the head cable assembly (3.2.11).
3. Remove the space motor assembly (3.2.14).
4. Remove the mounting screw (1).
5. Detach the belt clamp (2).
6. Remove the belt pulley (3) from the bracket (4) and detach the space belt (5).
NOTE:
When installing the belt clamp:
Place the ribbed side of the belt clamp facing up as shown.
P/N 50702301 Belt Clamp B.2.04, 05
P/N 51303101 Belt: Mini Pitch (Space) RSPL B.2.04, 05