Page: 135
Service Guide ML395/395C
Chapter A Board Diagrams
A.1 OVERVIEW
A.1.01 General Information
This section describes the characteristics of the printed circuit boards used in the product.
The following areas are covered.
Firmware
Fuses
Jumpers
Sensors
Switches
Test Points
Where an item is not applicable, the word
NONE
will be listed.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
To Next Page
