YES Go to A.
A
Does the release lever microswitch function correctly?
NO Perform the operations listed below.
1. Correctly connect cable CN9 on the main control board.
2. Replace the release lever, microswitch, and cable assembly.
YES Replace the control board.
Has the problem been resolved?
YES End of procedure.
NO Contact Okidata Technical Support.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
To Next Page
Loading...
